DIY - Headband
Looking for a new accessory for this summer ? ☀️
Create a pretty headband thanks to our new tutorial !
Note
Duration : 3h
Difficulty : 4/5
Material
-
20 inches printed fabric
-
Odif 505 Temporary Adhesive
-
Thread
-
6 inches elastic
-
Scissors
-
Tape measure
- Odif Glitter Varnish (Bonus)
Step 1
- Make the patterns: 2 strips of 4 inches long by 23 inches wide.
Step 2
-
Spray Odif 505 Temporary Adhesive from a distance of 10 inches away on the pattern pieces.
-
Stick pattern pieces to fabric and cut out.
Step 3
-
Place each strip of fabric right sides together on long sides and sew with ½” seam allowance.
-
Turn to right side.
Step 4
- Intertwine both strips of fabric.
Step 5
-
Put the elastic in one of the strips 2 ¾” from the edge.
-
Sew the elastic on the seam allowance just sewn.
Step 6
-
Join the ends of the strip together and sew as shown in photo while stretching the elastic.
Step 7
- Take the other strip. Make a fold towards the inside of one of the ends.
- Place the strip of step 6 in the fold.
- Sew the elastic on seam allowance as in step 5.
Step 8
- Put the fourth end in the opening of step 7 so that there are now three ends.
- Close the length of the fold with an invisible stitch.
Step 9 (Bonus)
- Spray Odif glitter varnish in the color you want.
Conclusion
A perfect headband for summer days ! ☀️
Commentary
Subscribe form
Newsletter
Temporary Adhesive 505
Odif 505 Temporary Fabric Adhesive is ideal for no pin basting of the quilting sandwich.
It avoids threading steps and the use of pins.
It...
Glitter Varnish Blue 50
Odif glitter varnish provides a glittery finish thanks to its blue glitters.
Its result is brilliant.
It is scratch and UV resistant.
It can...