24-Frost Effect Coating

Pinterest
Facebook
Twitter
Email
Category:

Use

When applied to glass or plastic, varnish creates a frost effect. When dry, the result is identical to that obtained by acid etching or sand blasting but without the dangers associated with the latter two techniques. Varnish leaves no marks. Dry to the touch in 10 minutes; completely dry within 2 hours. Acid free.

Can be removed from most surfaces using very hot water but is permanent on acrylics and plastics.

 

Precaution of use

CAUTIONS – DANGER
For your security, use only for its purpose and in accordance with the instructions.
Contains REACTION PRODUCT: BISPHENOL-A-(EPICHLORHYDRIN). May produce an allergic reaction.
Extremely flammable aerosol.
Pressurised container: May burst if heated.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Read label before use.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Do not spray on an open flame or other ignition source.
Do not pierce or burn, even after use.
Protect from sunlight. Do no expose to temperatures exceeding 50 °C/122°F.
Manufacturer cannot be responsible for dangerous storage conditions or misuse.

How to use

1.Protect work surface.

2.Shake well.

3.Spray evenly from 8 inches.

4.Allow to dry before removing stencil or mask.

Achieve a more pronounced effect by applying 2 layers.

Care: Regularly clean with a damp sponge.
Can be removed from most surfaces using very hot water but is permanent on acrylics and plastics.

Note: Make a preliminary test on all new substrates or materials.

Not for use with items used for food.