50 - Glitter Varnish



Glitter finish varnish is glossy and transparent. Availiable in 6 colors : gold, silver, iridescent, red, green and blue. Acid-free and leaves no brush marks. Its unique formula allows spraying the product evenly without risk of clogging.

Share on pinterest
Share on facebook
Share on email

How to use

1- Protect work surface. Shake well before use.

2- Pre-wash before use on fabric; pre-test on scrap fabric.

3.- Hold can upright, 9-12 inches from surface.

4.Use a sweeping side to side motion until surface is covered. Apply a second coat if desired.

5- Allow item to dry for 30 minutes.

6- To clear nozzle, hold can upside down & press for a short burst.

7 – Wash garments by hand; cold water, no bleach.


Extremely flammable aerosol.
Pressurised container: May burst if heated.
Causes serious eye irritation.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Read label before use.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Do not spray on an open flame or other ignition source.
Do not pierce or burn, even after use.
Wash hands thoroughly after handling.
Wear protective gloves/protective clothing/eye protection/face protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
Protect from sunlight. Do no expose to temperatures exceeding 50 °C/122°F.
Manufacturer cannot be responsible for dangerous storage conditions or misuse.

WARNING : This product can expose you to chemicals including methanol, which is known to the State of California to cause developmental effects. For more information, go to www.P65Warnings.ca.gov