This varnish is applied onto glass or plastic to create a frosted effect. Once dry, the result is identical to that obtained by acid etching r sandblasting, but without the dangers associated with the latter two techniques. Available in 4 colors : white, yellow, red, and blue.
Precaution of use
CAUTIONS – DANGER
For your security, use only for its purpose and in accordance with the instructions.
Contains REACTION PRODUCT: BISPHENOL-A-(EPICHLORHYDRIN) EPOXY RESIN (NUMBER AVERAGE MOLECULAR WEIGHT < 700). May produce an allergic reaction.
Extremely flammable aerosol.
Pressurised container: May burst if heated.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Read label before use.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Do not spray on an open flame or other ignition source.
Do not pierce or burn, even after use.
Protect from sunlight. Do no expose to temperatures exceeding 50 °C/122°F.
Manufacturer cannot be responsible for dangerous storage conditions or misuse.
How to use
1. Protect work surfaces.
2. Shake well before use.
3. When used with fabric: prewashed. Ensure fully dry before applying.
4. Hold can upright, 9-12 inches; spray in a sweeping side to side motion until surface is covered. Apply second coat if desired.
5. Allow item to dry.